Zone model predictive control for pressure management of water distribution network

In the water distribution network (WDN), although the water demand of the node is changing constantly, the water quantity and water pressure of the node need to be met at each moment. To realize energy saving and consumption reduction, it is proposed to control the nodal water head of WDN in an appropriate narrow range. The frequent large fluctuation of the water demand, which may lead the water pressure exceed the expected range, increases the difficulty of the zone control. To realize optimized WND control, a novel zone predictive control is proposed, where two switching cases are considered. The switching condition is whether there are feasible solutions to keep the pressure within the expected region over the prediction horizon. When the condition is satisfied, the controller minimizes the variation of inputs with constraints of pressure range for ensuring the tank level staying within the expected zone and obtaining optimal economic cost. When the current pressure is out of the expected region or the condition is not satisfied due to the large variation of water demand, a reference trajectory of outputs is introduced, which is combined with the inputs as an optimization variable, and the constraints of expected zone are moved from the output to the introduced reference trajectory. Through minimizing the distance between reference trajectory and output, the controller will keep the tank level from deviating too far from the expected zone and will drive the tank level rapidly into the expected zone once the tank level exceeds the expected range. An application of the proposed zone MPC to WDN in Shinan District of Shanghai is given to illustrate its effectiveness.     

东濮凹陷濮卫洼陷带沙一上亚段沉积相与储层分布特征研究

东濮凹陷濮卫洼陷带沙一上亚段,从沙一上3到沙一上1,水体逐渐变浅、退出本区,上2-3组发育以湖相为主的沉积体,上1组向以河流相为主的沉积体过渡;砂岩在每个组均有分布,上2-3主要为分布在文明寨地区、卫城构造北部的受断层控制在断层下降盘形成的远(近)岸浊积砂体,以及濮城构造北部的滩坝砂,上1为主要分布在文明寨地区、卫城构造及濮城构造南部的条带状河道砂体。     

阳泉矿区煤样不同应力状态下声发射特性分析

为探索原煤煤样的力学性能和不同应力状态下的声发射活动特性,对阳泉矿区新景矿、平舒矿主采煤层的煤样进行了单轴、三轴压缩和巴西劈裂的声发射试验,分析了2种煤样力学性能及不同加载过程的声发射活动规律。证明通过监测声发射(微震)活动分析煤样或煤岩体内部破坏状态是一种方便有效的手段。     

Beta-Binomial删除信道中的喷泉码文件传输协议

由于命名数据网络(NDN,Named-Data Networking)无环路、逐包、逐跳转发的特点,使得数据包回传成功率降低,而传统的TCP/IP协议中的ARQ和ACK机制对于多播会话不再适用.由于NDN中的传输信道可以等效为二进制删除信道,因此可以通过应用层编码来实现文件的可靠传输.传统的信道编码技术如卷积码、级联码和RS码等复杂度较高,而将NDN与低复杂度的喷泉码的结合可以实现分布式的存储架构,因而可通过喷泉编码在应用层协议中实现可靠的纠删机制,保证整体文件的传输可靠性.以往的研究一般是基于确定的删除概率信道模型,但是由于网络的异构性和信道噪声等因素影响,可能会造成信道丢包概率呈随机性分布.因此,本文在Beta-Binomial分布模型的前提下,根据贝叶斯统计的先验信息和中心极限定理,对随机概率下的纠删信道的文件可靠传输协议进行了数学建模和理论推导.仿真结果显示此模型更具有普适性,此传输协议可在信道状况未知的前提下从理论上求出最小发包数,减少冗余编码包,提高文件整体的投递成功率,在保证传输可靠性的同时有效提升协议传输效率.     

肉桂特色资源加工利用产业发展现状

肉桂是我国特色经济林树种，我国肉桂种植面积和年产量均居世界首位。我国肉桂主要分布在两广地区，其中广西为14.9万hm²，广东为8.9万hm²，两地面积占全国肉桂分布总面积的95%以上。肉桂既是著名的香料又是传统的名贵中药，具有极高的经济价值，发展肉桂产业对于促进农民增收、维护健康中国有着重要的意义。本研究综述了肉桂资源量、分布情况及主要利用部位，介绍肉桂主要产品（如桂皮，桂枝，肉桂粉及肉桂油）及加工技术现状、产品质量控制及其分析检测方法，分析了产业未来的发展趋势，并提出了产业发展的对策和措施：加强肉桂标准化示范基地建设，提高优质资源供给能力；提高肉桂加工利用技术水平，延长产业链；培育肉桂龙头企业，提高产品市场竞争力。为我国肉桂特色资源加工利用产业的可持续发展提供一定的思路。     

Experimental investigation on the plasma morphology of ablative pulsed plasma thruster with tongue-shaped and flared electrodes

Ablative pulsed plasma thrusters(APPTs) are considered as an attractive propulsion option for station-keeping and drag makeup purposes for mass-and power-limited satellites. In order to understand the physical mechanism of APPTs, high-speed camera and optical emission spectroscopy are utilized to investigate the plasma characteristics including the spatial distribution and composition between the electrodes. The plume images and spectra at different times and positions are experimentally recorded, and the spatial distribution, composition, and trajectory of plasmas can be concluded through analyzing them. With the increase of the distance from the ablation surface, two clusters of plasmas near the anode and cathode meet downstream,and the species and density of plasmas tend to be uniform.     

袋装水泥装车机及拨板机构的设计与研究

针对袋装水泥装车半自动化问题，设计一款全自动装车机。首先，根据袋装水泥车间生产状况，确定水泥装车方案，即采用抽屉式逐层装车原理，利用ＳｏｌｉｄＷｏｒｋｓ创建装车机三维模型；其次，为使水泥包快速准确地到达指定位置，针对拨板机构中的分拨板及导柱进行受力分析，建立其力学模型，推导出应力公式；最后，通过 ＡＮＳＹＳ有限元软件进行分拨板的力学仿真，为后续的优化设计提供依据。     

On the thermal conductivity of bimodal SiC/A356 composites fabricated via powder metallurgy route

The present study investigates the thermal conductivity of bimodal SiC particulate distribution in aluminum matrix composites fabricated via powder metallurgy route. The effects of the SiC_p reinforcement size distribution and processing parameters such as sintering time and temperature on the thermal conductivity have been examined. The Box–Behnken experimental array was employed to identify the effects of selected variables on the thermal conductivity of the composite. A reasonable augmentation in the thermal conductivity was observed with an increase in sintering time and %volume fraction of fine SiC particulates. It has been demonstrated that the matrix doped with fine SiC particulates (37?µm) occupied interstitial positions and formed continuous SiC–matrix network resulting in minimizing the micropores that contributed for good thermal conductivity, that is, 235?W/mK. Scanning electron microscopy (SEM) and x-ray diffraction (XRD) were conducted to evaluate the microstructure architecture and interfacial phase formation.     

基于梯度分布调节策略的Xgboost算法优化

为了解决集成学习模型Xgboost在二分类问题中少数类检出率低的问题，提出了基于梯度分布调节策略的改进的Xgboost算法——LCGHA-Xgboost。首先，通过定义损失贡献（LC）来模拟Xgboost算法中样本个体的损失量；而后，通过定义损失贡献密度（LCD）来衡量Xgboost算法中样本被正确分类的难易程度；最后，提出了梯度分布调节算法LCGHA，依据LCD动态调整样本个体的一阶梯度分布，间接地增大难分样本（主要存在于少数类中）的损失量，减小易分样本（主要存在于多数类中）的损失量，使Xgboost算法偏向对难分样本的学习。实验结果表明,与Xgboost、GBDT、随机森林（Random_Forest）这三大集成学习算法相比，LCGHA-Xgboost算法在多个UCI数据集上的召回率（Recall）值有5.4%~16.7%的提高，AUC值有0.94%~7.41%的提高；在垃圾网页数据集WebSpam-UK2007和DC2010数据集上所提算法的Recall值更是有44.4%~383.3%的提高，AUC值有5.8%~35.6%的提高。LCGHA-Xgboost算法可以有效提高对少数类的分类检出能力，减小少数类的分类错误率。     

[可靠性建模及试验技术]重型机床液压元件油液污染退化量分布剖面可靠性建模

针对重型机床液压系统故障频繁且多与油液中的固态颗粒污染物相关的问题，进行了油液污染趋势变化试验。通过时域分析获得了油样颗粒数的有量纲和量纲一参数，通过Q-Q图和K-S检验分析有量纲参数，污染颗粒数是退化量服从正态分布的退化数据。进行了油液污染与环境相关性分析试验，采用相关系数法分析得到，颗粒数变化量与一定范围内的温度、流量、压力的相关性小；将液压元件分为管路、阀、过滤器三类，用直径5 μm左右的颗粒和直径大于15 μm的颗粒分别研究管路及阀件的堵塞和磨损情况，以过滤器过滤精度大小的颗粒研究过滤器的堵塞情况，设定ISO4406标准20/17级对应的颗粒数为阈值，利用退化量分布建立了液压元件单一故障模式的可靠性模型；利用竞争失效模型将上述模型融合为多故障模式下的可靠性模型。